Maintenance And Maintenance Of Dry Laminating Machine

1. The rubber roller and the roller should work every day after the glue should be wiped clean, if dry glue, never allowed to scrap with a hard device.
2. In the course of each shift should be part of the winding part of the chain, sprocket filling oil 2-3 times a day after work, the machine should be wiped clean, the leakage of the adjustment screw dry, Injection of oil, 2-3 times a day to the open gear drive tooth surface plus grease, the net on the rubber roller part of the roller at both ends of the axle oil filling the inside of the oil.
3. To prevent excessive glue and sagging around the phenomenon, if any should immediately wipe clean, to prevent corrosion.
4. Work can not just open the drive shield and drying tunnel, to prevent dust, impurities and personal injury.
5. If there is abnormal sound in the work should immediately stop checking.