Technical parameter (Based on 6 colors)
Printing cylinder diameter
1. Seven servo motor controlling system which can make tension close loop control, so we can make the material waste to the least,during one year's running,you can save huge cost.
2. Unwind double station turret with air shaft,two servo motor control,auto splicing and cutting.
3. Rewind double station turret with air shaft,two servo motor control,auto splicing and cutting.
4. Independent chassis without connection,the bolt will be installed into the ground to make machine more stable during high speed running.
5. Pneumatic heavy type doctor blade has a longer life and it can remove extra ink completely from the printing cylinder to make the printing more clear and shinning.
6. Shaftless pneumatic printing cylinder installation which can save much time
7. Ink is circulated automatically,special ink plate design can make ink circulate more easily
8. Automatic computer register with video inspection.
9. It is equipped with double long register screw which has longer moving distance to make the registration more accurate.
10. Independent drying and suction exhausting system, air circulated, max recycled rate 50%,
waste air eliminating tunnel. External blower increase the air amount for a better heating.
11. Unwind 2 floating roller, rewind 2 floating roller to micro adjust the tension during machine running
12. Oven is pneumatic open and close which is convenient for material guiding.
13. Assisted oven install on the top of last printing unit to completely dry the printing material.
14. Turning bar can be installed to do reverse printing for PE tube material.
15. Water cooling roller to cool the printing material after heating
16. Ultrosonic EPC device can be installed on the top of unwind part