Technical parameter (Based on 6 colors)
Printing cylinder diameter
1. Whole machine PLC control with touch screen which is convenient for operation
2. Seven inveter motor controlling system which can make tension close loop control, so we can make the material waste to the least.
3. External unwind double station turret with air shaft, inverter motor control, automatic splicing and cutting. It can save much time for changing roll and save much material waste.
4. External rewind double station turret with air shaft, inverter motor control, auto splicing and cutting. It can save much time for changing roll and save much material waste.
5. Pneumatic heavy type doctor blade has a longer life and it can remove extra ink completely from the printing cylinder to make the printing more clear and shinning
6. Shaftless pneumatic printing cylinder installation which can save much time
7. Ink is circulated automatically by ink pump
8. Automatic computer register which can make color control precise.
Video inspection system, you can watch the printing picture by computer monitor, so that you will know the printing accuracy is good or not.
9. Double long register screw make registration accurate.
10. Independent drying and suction exhausting system, air circulated, max recycled rate 50%, waste air eliminating tunnel. External blower increase the air amount for a better heating.
11. Unwind 2 floating roller, rewind 2 floating roller to micro adjust the tension during machine running
12. Heating pipe installed in the oven to heat the machine.
13. Assisted oven install on the top of last printing unit to completely dry the printing material.
14. It can be installed with turning bar to realize reverse printing.
15. Water cooling roller to cool the printing material after heating