Home > News > Industry News

Inspection before use of automatic mask making machine

Update time : 2020-11-17

Source : Zhejiang Deguang Machinery Co.,Ltd

Views : 177

Inspection before use of automatic mask making machine

automatic mask making machine

We need to do a series of checks before using the fully automatic mask making machine to ensure that the equipment can operate stably. The transmission system of the automatic mask making machine includes motors, gears, reducers, sprockets, chains, conveyor belts and other components. We need to check whether there is dust on the outer surface of the automatic mask making machine that interferes with heat conduction. Gears and sprockets are It's not oiling, is there any attachments. Is the tightness of the chain suitable? Is there any foreign matter? Is the butt screw between the forgings loose? Is the lubricating oil of the reducer enough? Below we will introduce the inspection precautions before using the automatic mask making machine from three aspects.

1. Ultrasonic system: (consisting of ultrasonic electric box, vibrator, soldering pin and butt wire).
Check whether the ultrasonic system is clean, especially the ultrasonic electric box, the vibrator (transducer), and the soldering pin (expansion ratio) must be cleaned simply without water, and the wiring must be firm. Often check the degree of damage to the ultrasonic soldering pin. Pay attention to the investigation of the change plan of the voltmeter and ammeter pointer on the ultrasonic electric box.

2. Air supply system of automatic mask making machine: (composed of air source filter device, bronchus and air cylinder).
Check if there is water in the air filter cup? Add water and add water to the air compressor at the same time (add water to the air compressor: add water to the air compressor every day in areas with high humidity). Check whether the bronchus is leaking? Is the cylinder leaking? Is the cylinder magnetic sensor orientation and operation normal?

3. Electrical system:
Check whether the equipment circuit connector is loose, and whether the main power cable, branch signal cable, etc. are damaged? Ageing? Is the electrical device loose? Is the inside of the electrical box clean and simple? Is the exhaust fan working normally?

The automatic mask making machine produced by Deguang has high quality and is trusted and loved by customers at home and abroad. If you want to know more about the automatic mask making machine, please contact us.

Tag: automatic mask making machine, automatic mask making machine use, automatic mask making machine check